VIBRATION TABLE FOR THE PRODUCTION OF AGRICULTURAL STUD FLOORS

• This vibration table is used for the production of stud floors;
• It is used to prepare floors suitable for use by animals, where hygiene conditions are important;
• In this situation the concrete panels have small holes on one side and channels on the reverse side;
• As the holes are small they do not cause problems to the legs of the animals;
• Urine and faeces can permeate through the holes and into the drainage system;
• Because of the aggressive nature of the urine and faeces it is necessary to use high quality concrete panels, which must be compacted to a very high standard;

 VIBRATION TABLE FOR THE PRODUCTION OF STUD FLOORS

Technical specification:

Active area of table
3500 x 800 mm
Frequency of vibration 75 Hz (vibrations per second)
Table resonance frequency
< 15 Hz
Range covered by frequency converter
45 - 55 Hz
Stimulating force at 83 Hz working frequency
40 kN
Stimulating force range:-  
45 Hz
32.4 kN
55 Hz
48.4 kN
Motor revolutions
2850 rpm
Motor power
2 x 2.2 kW
Dimensions 3500 x 800 x 800 mm
Weight
2000 kg
Vibrational weight
1000 kg
Maximum load - product and mould
2000 kg
Recommended product load
1500 kg
Amplitude without load at 75 Hz working frequency
0.18 mm
Maximum load amplitude at 75 Hz working frequency
0.07 mm
Acceleration without load at 75 Hz working frequency
4.1 g
Maximum load acceleration at 75 Hz working frequency
1.4 g
Mould clamping
Electromagnetic
Number of magnets
4
Voltage 4 x 18 V
Current 4 x 20 A
Clamping force

 4 x 20 kN
Machine noise
<80 dB
Technical specification in PDF  
 For more information please contact

info@krejcieng.com

+ 420 774 426 374